Top & Best Electric faucet: How to choose the best in 2020
Very mypricesaving.com. Today’s topic is: electric tap, a spout model that spouts water at three or more different temperatures: cold, warm and hot.
This faucet model uses an electrical resistance similar to that of the shower, when turned on, it heats up a lot and the water that crosses the ducts comes out warm from the faucet, making it easier to remove the grease from dirty dishes, boil water faster and disinfect utensils.
If you are thinking about buying an electric faucet, but do not know which are the best models on the market, how much they cost and where to buy, you have come to the right place. In this article we will tell you everything you need to know before buying an electric faucet for your kitchen.
First, the most important
- The electric tap promotes water heating through an electrical connection much like the resistance of an electric shower. The tap is operated manually, just select the temperature by turning the knob.
- This faucet model can be used in the kitchen, bathroom or laundry sink. In the kitchen it can be used to remove grease from dishes, help boil water and to wash dishes on cold days. In the laundry use to remove stains from clothes and in the bathroom use to wash your face or hands.
- The electric tap can significantly increase the value of your electricity bill, so you must follow the specifications that best suit these models and avoid unnecessary expenses.
You may also like:
- Kitchen tap: What’s the best of 2020?
- Filter faucet: How to choose the best one in 2020?
- Gourmet Faucet: How to choose the best for your kitchen in 2020?
The Best Electric Faucet Models: Our Choices
Washing the dishes with warm water in winter is very good. Not to mention that having an electric faucet helps in cleaning greasy parts. Below, you can check the best faucets in this category for sale on the market.
- A practical and economical option
- Very modern electric tap
- An easy option to install
- A modern format option
- The tap that reaches the entire sink
Although energy consumption is high with the use of an electric tap, the benefits can outweigh this extra expense. Throughout this Guide, we will highlight the advantages of having such a tap at home and detail all the criteria that you should consider before choosing yours.
You will see how everyone will want to wash the dishes after installing their electric tap.
What is an electric faucet?
The electric tap is a simple and inexpensive solution to heat the tap water without having to install a central heater in the house. You can find templates to use in the kitchen, bathroom and even laundry sink.
This type of faucet has several functions: it brings more comfort for you to wash dishes or your teeth in winter, helps to remove grease from dishes and disinfects cutlery, among other uses.
The electrical functioning is similar to the shower, that is, an internal resistance, which heats and heats the water that passes through this system. The similarity with the shower does not stop there, this model of faucet has a power in watts and the expense very similar to that of a shower.
This faucet model is available in different sizes, powers and configurations, so you need to be attentive to the specifications of each model, so you can choose one that is ideal for your needs.
Did you know that the electric tap has a very interesting function?
When opening the valve, the water enters the box of the electric tap generating a pressure that activates the diaphragm; when pressed, the diaphragm is moved from place until it reaches an electrical contact inside the tap.
At that moment, the electric current is activated and runs through the entire resistance, making it hot and heating the water in the tap box by means of heat transfer.
After use, the valve is closed and the water inside the tap loses pressure, causing the diaphragm to return to the starting point and deactivating the electrical resistance of the tap.
What are the advantages and disadvantages of having an electric faucet at home?
We have already commented on some of its advantages. But we will explore this aspect a little more in this section, as well as mention some disadvantages.
You can find electric taps in up to 4 temperature options that can be controlled using selector keys, much like the shower. You have to turn it off to change the temperature, but some models don’t even need it, just turn a selector knob.
It is essential that there is an independent circuit only for the electric tap, for that it is necessary to check the power of the chosen model, which varies from 4000 to 6000 watts.
In addition to checking the power of the tap, it is necessary to pass the ground wire when installing the part, in addition to having an exclusive circuit breaker for the tap in the light box.
Although this model uses a lot of electricity, water consumption is more economical, since practically all models have an articulated, more continuous and smooth water jet.
Most models are manually operated, but there are options for automatic activation and shutdown, mainly for bathroom sink models, where the jet shuts off after a certain period of use. There are even more modern models with motion detection.
Another thing you will save when choosing an electric faucet is detergent (and time), as hot water helps to remove dirt and grease more quickly and more efficiently.
Warm water is also a very interesting resource, as you will not be able to wash fruits and vegetables in hot water, but in warm water, and it helps to remove dirt from food.
If you are thinking of buying an electric faucet for your kitchen, know that you will have many advantages in your day to day, but we can not fail to mention some disadvantages of this product, which are listed in this table below:
What differentiates one electric tap from the other?
There are several faucet models available for sale, let’s talk a little about each one: conventional, gourmet, single lever and electronic faucet. At the end, we prepared a comparative table with the main characteristics of the electric and electronic models.
The conventional faucet, as the name implies, is the most common type of faucet, they have a register that controls the water outlet at room temperature, that is, with this faucet it is not possible to regulate the water temperature.
On very hot days the water comes out warm, because the sun heated the plumbing / pipe, on cold days the water also tends to come out colder, as it adapts to the climate it is doing.
Generally, the design of this type of faucet is very common, spout high, mobile or not and made of metallic material, however it is increasingly common to see models with different shapes and designs, some guarantee more comfort and others avoid wasting water resources.
The gourmet faucet is the most modern model, it is also the largest, as it is usually between 50 and 70 centimeters in height, but some models are smaller, having about 30 centimeters.
The tap water jet can be concentrated or sprayed and some models have an anti-splash function, which promotes water savings. Some models have two temperature options in addition to cold water: hot or warm.
It is very efficient, especially in terms of mobility, since these models have a flexible flexible shower head, which facilitates the cleaning of the tap, sink, food and utensils on the countertop.
Some gourmet tap options have a filter attached, and an independent outlet for filtered water, which adds more functionality to this versatile product.
Mono and double-handle mixer
The mixer can be divided into a single lever and double lever mixer. The conventional model (double spout) has different registers, one for cold water and another for hot water.
The single-lever models are more practical, as they make it possible to control the water outlet, the hot or cold water flow, or the mixture of the two, all in a single actuator, which moves vertically.
The cool thing is that with the single lever model you can control the temperature and the water flow, helping to save water and light and reducing the environmental impact.
Both single-lever and double-lever models require plumbing for hot water and higher water pressure to work perfectly, some recommend at least two, three or even five meters of pressure, if in doubt consult the manufacturer’s indication.
Between the two options, the double control mixer uses more water, since it is necessary to operate two levers to reach the temperature that the other model would reach with just one tap.
The electronic tap is a variation of the electric tap, with the difference that in this model, it is possible to control the water temperature gradually, that is, you are going to regulate the temperature you want, whereas in the electric model, the temperatures are pre -defined.
Because of this more specific temperature control, this system becomes more economical because, in many cases, in the electric taps one temperature option is too hot and the other too cold and, generally, the person chooses to use the higher temperature , consuming more electricity.
The activation system of the electronic tap is also different, there are models in which you turn a button that increases or decreases the temperature gradually and there are versions in which the activation is by timer and the most technological models have motion detection.
How does the installation of the electric tap work?
The first thing you need to know is that the installation of the electric faucet must be done by a qualified professional, as it is a process with a certain degree of difficulty and some dangers that a professional knows how to deal with.
Before installing or performing any maintenance on the electric tap, it is necessary to turn off the circuit breaker, to avoid accidents and the burning of electrical appliances such as refrigerator and microwave.
It is also necessary to check if the wires of the circuit breaker are similar to the wires of the electric tap, as they need to meet the same technical specifications to guarantee the performance and safety of the device.
Check out the installation tips:
- The first thing that must be done is the grounding of the ground wire, which should not be neutral, but in green or yellow, as this reduces the risk of accidents involving electric shock.
- It is also necessary to have an outlet close to the installation site, but it is not correct to connect an electric tap to an outlet, but directly to the conductors of the circuit, inside the passage boxes.
- During installation it is necessary to keep the electric tap in the cold water position, this is essential to avoid burning the resistance.
- The cables must have a minimum thickness to drain the electric current without loss of energy or overheating, which does not occur in common taps. The thickness of the cables will depend on the power of the tap.
- 4500 watt models must be installed by cables with a section of 4.00 square mm, for models above 4500 watt up to 6400w choose cables with a thickness of 6.00 mm2.
- Conductor cables with an inappropriate section create the risk of accidents and compromise the correct functioning of the taps, leaving the consumer with the feeling that the tap does not heat up as it should, when in fact it was not installed correctly.
How much does an electric faucet cost?
Some factors influence the price of an electric faucet, such as parts design, material of manufacture, temperature control options (range from two to four) among other characteristics.
The cheapest electric tap will cost around R $ 80, now if you want a more technological model, with gradual temperature control and water that changes color according to the temperature, you will pay around R $ 250.
Where to buy an electric faucet?
If you are interested in buying an electric tap, know that it is possible to find this equipment in various types of stores, starting with own hydraulic equipment stores.
But after reading this article you are already an expert in electric faucet and can buy a model over the internet. We suggest you take a look at Amazon’s e-commerce, there are several options of models and brands, and the best thing is that you can buy from the comfort of your home. You can also check the digital versions of the stores mentioned.
Purchasing criteria: Factors for comparing electric faucet models
In this section we will point out the most important features that must be taken into account before purchasing an electric faucet. The main points you should pay attention to are:
- Types of spout
- Wall or bench
- Temperature levels
Now that you know the most relevant factors when choosing a faucet model, let’s explain item by item, that way you don’t have any doubts!
The first thing you need to consider when buying a faucet of this type is the electrical voltage of your home, as the options for electric faucets are divided between 110 or 127 and 220 volts. Some models are also bivolts.
When in doubt, we recommend that you choose the 220 volt model, as this is the voltage of the showers, and as the electric tap is very similar (in several aspects) to this device, this voltage is enough.
The 220 volt option also generates savings in cables, because at this voltage they need to be thinner than in the 110/127 volt models, which are thicker.
Remember that regardless of the voltage, these models will consume the same amount of electricity and will have the same power.
Types of spout
The choice of the type of spout (part of the faucet through which the water flows) is directly related to the size and shape of the tub (the sink itself). The formats must be compatible so that the person using it does not get wet while washing dishes, food or even hands.
First, we need to explain that there are three types of spouts: the high spout that is the longest tap, the low spout, which as the name says are the smaller models (usually found in the bathroom) and the straight spout that is adaptable to all types of vat.
The spouts can also be mobile – which turn from side to side – or fixed – which do not move and are therefore less practical than the first model. As the electric tap can be used in the kitchen sink and also in the bathroom.
In the bathroom, for support vats use high spigot taps and for built-in vats use low or straight spouts. As in kitchens, the bowl is usually supportive, use only the high or straight spout.
Wall or bench?
The electric tap can be installed in two different places: on the wall or on the bench. Most models are adaptable for both fixation locations, and other models are specific to the wall or bench.
The taps installed directly on the wall need to find electrical wiring (to heat the water) and a plumbing outlet, so it is recommended to choose the location of installation of the taps when building or renovating the house, or to adapt to the options already available in the property ( if rented).
In this type of fixation, the taps have the siphon built into the wall, freeing up space under the sink. Because the installation was done in a built-in place, maintenance and eventual replacement of parts is a more complicated process, since it is necessary to break the wall to fix the defect.
The countertop faucet, in turn, has a more modern look and is easier to clean and fix any installation defects. Once you have the hydraulic and electrical installation point, just fix the tap. Some models are easy to install, as you just need to screw the tap into the right outlet.
The wall or bench models are installed at different heights, so the hydraulic points are also different. Since these faucets are single lever, they need only one hole in the wall or countertop.
Electric taps can have 3 to 4 temperature options, which are: cold, warm, hot and super-hot water. These different temperatures can be activated by a selector switch on the outside of the tap, gradually by a circular selector (electric / electronic taps).
What heats the water inside the faucet is an electrical resistance very similar to that of showers, so avoid overloading this part by using water at the maximum temperature for a long time uninterrupted.
You should also not change the water temperature with the tap running, as this can burn the electrical resistance. Only on taps with gradual temperature adjustment can you change the temperature while using the spout.