Work and Study

Top & Best Pinador Review 2021 – How to Select Ultimate Buyer’s Guide

Pinador: How to choose the best in 2021?

Do you work in the branches of carpentry or crafts? Then it’s in the right article! Today we are going to talk about the pin, an important tool that guarantees safety and speed in the placement of pins with or without heads in wooden pieces!

Choosing a pin is not so simple: You need to know which is the most suitable for the types of work you do, understand the relationship between the tool and the air compressor and recognize all the safety rules involved. But do not worry! We’ll talk about all of that in the next lines of the article!

First, the most important

  • A pin is extremely versatile: It is more used in carpentry or handicrafts, but from shoes to civil construction it is also possible to find great uses for it.
  • The tool replaces the long and tiring work with nail and hammer in an automated way, giving a lot of agility to what could previously take hours a day.
  • There are pneumatic and electric pinners. Most of the time, the best idea is to choose the first option, but the second option can also be useful in some specific situations.

You may also like:

  • Drill: How to choose the best one in 2021?
  • Wrench: How to choose the best one in 2021?
  • Sander: How to choose the best one in 2021?

The best pins: Our recommendations

To help you choose, we have selected some high-level pins, with different features and applications. Thus, you will be able to familiarize yourself with the one that brings you the most benefits!

  • The ideal for crafts
  • The best for those in great demand
  • The most versatile model

Buying Guide

If you came to this article, it is because you have a lot of doubts about how to buy the best pin. Therefore, we have selected some of the most frequently asked questions about the tool to answer below.

It’s time to understand the differences between pin types, the ideal way to use and more!

What is a pin and what is it for?

The pin is a tool that facilitates the placement of pins on pieces of wood or other perforable surfaces. It is mainly used in carpentry and handicrafts, but it is also common in shoe, civil construction and various areas.

Pins replace nails on most occasions, giving more speed and comfort when performing services that would previously require the hammer and nail set.

It is possible to find pneumatic or electric pinners. The former require the purchase of a separate air compressor, while the latter consume electricity and are slightly less efficient.

Did you know that the pin is a tool that needs to be handled with great care and attention to avoid accidents?

According to official figures, 42,000 people go to the hospital annually in the United States because of pinchers accidents. Hands and feet are the most affected parts.

Follow the safety rules to avoid being one more to have an accident with the tool!

What are the advantages of a pin?

The work of hammering repeated nails into a piece of wood is long and tiring. Speeding up the process is the biggest advantage of the pin: It gives an incredible speed to the work, saving a lot of time. It is a way to automate a process, similar to what a screwdriver does .

The pinner is still a versatile tool, capable of being used in various types of wood and different production areas, ranging from the most delicate, such as handicrafts in small pieces, to civil construction.

Its handling is quite simple, although it requires constant care with safety to prevent accidents.

On the negative side, we can highlight only the higher cost than the traditional nail and hammer combo and the need, in most models, for the use of an air compressor.

Check below a table with the main advantages and disadvantages of the pin:

What are the types of pin?

There are two main types of pin on the market: pneumatic and electric.

The pneumatic pin works with compressed air. You need to connect a compatible air compressor to it , capable of reaching a pressure similar to that of the tool. Typically, the number is around 100 PSI.

On the other hand, the electric, in most cases, does not have the same power or working capacity as the tire. It can be efficient at most with 20 or 30 mm pins, most recommended for crafts or delicate work.

We selected a video from the Adílson Pinheiro channel that explains in depth the difference between the types:

How to use a pin?

When handling a pin, it is essential to wear protective equipment. The most important are gloves and safety shoes , since hands and feet are the parts of the body most affected by accidents. Always keep your attention and care not to make mistakes.

 

The pins must be three times larger than the thinest part to be nailed.

Then, you need to make the correct choice of pins. Technical courses and popular knowledge often say that they need to be three times larger than the thinner part to be nailed.

That is, for a 15 cm wood, a 45 cm pin should be used. Unless, of course, that number is greater than the thickest part. In this case, add the two parts together and choose a pin slightly smaller than the total thickness.

There are four types of pins most popular on the market: F, T, C and B. We made a table to help you choose:

After checking that you have the correct pin for the activity you are going to perform, simply fill the load compartment with compatible pins and start work.

You will mark the wood at the point to be nailed, point the tool and fire the trigger. As already mentioned, handling is quite simple. Just remember again to pay close attention to safety!

How much does it cost and where to buy a pin?

The price of a pin can vary a lot: Simpler models, recommended for crafts and delicate works, can cost less than R $ 100. If you prefer a high-level power tool, with efficiency similar to a pneumatic one, you can pay more than R $ 1,000.

To purchase a pin, you can go to a house of building materials or special products for joiners. The best option, however, is to buy online: We recommend the Amazon, full of good models. Also check out Amazon.

Purchasing Criteria: What to consider when purchasing a pin

You already know which pin is best for you and how to make the best use of it. But, before finalizing your purchase, we need to talk about some technical issues. We selected four items to discuss:

  • Capacity
  • Working pressure and power
  • Air compressor
  • Ergonomics

Shall we learn a little more about each of these criteria?

Capacity

We have already mentioned that one of the pinador’s main virtues is the agility it gives to work. So, the ideal thing is that you don’t have to stop all the time to refill the compartment in which the pins are, don’t you think?

Check the pin capacity of a pin. Most of the time, it will be approximately 100. If you need more than that in the work you do, it may be good to look for a model that can handle a slightly larger number.

Working pressure and power

Working pressure and power are the measures that indicate how efficient and capable a pin is in his work. They refer, respectively, to pneumatic and electric models.

In pneumatic models, the working pressure is measured in PSI and becomes the force applied to the pin at the moment of firing. Likewise, when we talk about an electric model, the greater the power, the more it will be possible to drill hard or resistant wood.

You do not need these numbers to be very high if you are going to work with handicrafts, wood with simple perforations or shoes, but in some others it is necessary to achieve higher working pressure or power.

Air compressor

It is essential that the air compressor is compatible with the pin.

You already know: A pneumatic pin requires the presence of an air compressor, which will almost always be purchased separately. But it is still essential to pay attention if it is compatible with the tool.

For this, note if the working pressure of the pin is similar to that offered by the air compressor. If there are similar numbers, the accessory can be used without problems. If not, it is better to look for another one.

Ergonomics

Work with the pin can be very repetitive. You may need to fire the trigger dozens or even hundreds of times in the same day. Therefore, it is easy to conclude that the comfort to exercise the activity is important.

Look for pinners that are concerned with ergonomics, offering comfortable angles or positions for the hands, rubberized liners and less weight. So, in addition to giving more speed and agility to your work, the tool will also not cause your body to suffer!

 

 

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *